来料检查：除正常检查项目外，增加油检。设备有放大镜，显微镜、专用吸油纸等。一旦查到有油，将本批货隔离开来，做上标记，并送样给客户确认。

 

Incoming inspection: except for normal inspection items, increase the oil inspection. Equipment has a magnifying glass, microscope, special oil absorbing paper, etc.. Once found the oil, the goods will be separated from the goods, to make the mark, and to send the sample to confirm.

 

预清洁：对有油胶盒先进行外观检查，并清除可见污渍、笔迹及胶渍等。在净化铝材配件 http://www.jnjkjh.com/ 的操作中应注意与正常料所用工具及场所区分开来。

 

Pre cleaning: the first appearance of the oil plastic box to check, and the removal of visible stains, handwriting and rubber stains, etc.. In the purification of aluminum parts of the operation should be noted that the use of tools and places to distinguish between normal.

 

去油：对有油胶盒采用特殊除油清洗程序。

 

Oil: on oil glue box adopts special degreasing cleaning procedures.

 

自动拉清洗：对有油胶盒进行自动清洗，清洗之后拉中的水及溶液要全部换掉，以免交叉污染正常料。

 

Automatic cleaning: to have the oil plastic box for automatic cleaning, after cleaning the water and the solution to be completely replaced, so as to avoid cross contamination.

 

制程/出货检查：清洗完后进行抽检，用放大镜、显微镜、吸油纸等。

 

Process / outgoing inspection: after cleaning the sampling, with a magnifying glass, microscope, oil absorbing paper, etc..

 

包装出货：在包装时要在标签上注明有油，以便客户区分和追溯。

 

Packaging: in the packaging to be marked on the label with oil, so that customers distinguish and trace.